[101] DISRUPTOR | 1 Litre High-Alkaline Pre-Wash Concentrate

Description

[ QUICK NOTE ] This is a pure concentrate and doesn’t ship with a trigger sprayer. To get the best out of the chemistry, you’ll need to dilute it into a separate bottle first. If you need pro-grade hardware, check out our Operator Dilution Kits.

[101] DISRUPTOR | High-Alkaline Pre-Wash Concentrate

“Disrupting the dirt and the industry at the same time.”

The Pre-Wash, Re-Engineered.

The UK detailing market is currently flooded with two extremes: overpriced “show foams” that offer plenty of bubbles but zero cleaning power, and cheap, raw TFRs that perish window rubbers and cloud trim. [101] DISRUPTOR ends that compromise. We didn’t build this for the “likes”; we engineered it to physically deconstruct road film, grease, and organic contaminants at a molecular level.

IMPORTANT: Always test on an inconspicuous area first. This is a high-performance chemical; never allow the product to dry on any surface.

The Modulus Difference: Why it’s a “Disruptor”

• Alkaline Reserve over “Flavoured Water”: Most brands sell you a high pH that neutralizes the second it touches dirt. DISRUPTOR is built with a massive Alkaline Reserve, meaning it has the “fuel in the tank” to keep fighting until the mineral bond is cracked.

• Surgical Chelation: While rivals rely on raw, aggressive hydroxides that etch sensitive finishes, DISRUPTOR uses a sophisticated balance of high-end surfactants and a massive chelation package. You get the raw cleaning power of a industrial degreaser with the stability required for modern clearcoats and EPDM rubbers.

• The “Wet” Penetration Tech: We stripped out the useless thickening agents that create a visual “shaving cream” effect but block cleaning. DISRUPTOR is a “wet” alkaline surfactant blend that penetrates the pores of the grime, disrupting the static bond for a truly contactless rinse.

• Elite Concentration, Zero Fillers: We don’t use dyes or scents to fake quality. DISRUPTOR is a pure, high-density formula that maintains a staggering pH 11.7+ even at a 1:20 dilution.

Technical Specification

• Primary Tech: Inorganic Salts & High-Yield Chelators.

• pH Level: ~11.7 – 12.0 (Concentrate).

• Dilution Ratio: 1:40 (Maintenance) to 1:15 (Restoration).

• Safety Profile: Buffered with Sodium Citrate to protect sensitive surfaces during the dwell phase.

How To Use:

1. Preparation: Ensure the vehicle’s surface is cool to the touch and in the shade. Do not apply to a hot surface or in direct sunlight.

2. Dilution: (in the dilution tab above)

3. Apparatus: For the most stable delivery, we recommend the Modulus 1L Operator Bottle & Trigger. Our UV-shielded bottles ensure the concentrated surfactants remain at peak potency.

4. Application: Apply the diluted DISRUPTOR from the bottom up. Ensure even coverage of heavily soiled areas (grille, lower doors, sills, and rear bumper).

5. Dwell Time: Allow 3 to 5 minutes of dwell time. NEVER ALLOW THE PRODUCT TO DRY. Keep an eye on the leading edge to ensure it stays active; at this pH level, the chemistry works fast.

6. Rinse: Thoroughly rinse with high-pressure water. Start from the bottom to maximize the “lifting” action, followed by a final top-down rinse to ensure all chemistry is cleared.

The Modulus Way: We don’t do “marketing.” We do chemistry. If an ingredient doesn’t make the car cleaner, it’s not in the bottle. Simple as.

UFI: SN80-F0DK-U009-VP3H