Car Cleaning Checklist

1. Decon & Arches

Clean wheel faces and barrels first. Flush arches of heavy grit to prevent it blowing back onto clean paint later.

2. Disruptor (Pre-Wash)

Apply to dry car. Focus on lower halves and rear. Dwell for 4 mins. Do not let dry. Rinse thoroughly from bottom to top.

3. Slick (Contact Wash)

Use 2-Bucket method. Start from the roof and work down. Rinse your mitt after every panel to prevent swirl marks.

4. Wet Seal & Rinse

While wet, spray sealant onto paint. Pressure rinse immediately to activate the hydrophobic bond. Watch the water bead.

5. Safe Drying

Use a dedicated drying towel or air blower. Ensure door shuts and mirrors are clear of drips.